Electronic Relay

Product Details:

This Relay Also Works In :

• 330 V
• 480 V
• 80 V

AE-240 Under & Over Voltage Relay are used in protection of gensets motors, pump, transformers, shunt caps etc from damage due to transient blackouts, brownouts 7 for auto start stop of AMF panels A low or high in all or any phase generates a changeover signal. Two potential free c/o contacts are given for breaker tripping - Relay is auto reset Both under & over & voltage are settable.

Product Details:

The relay monitors the current passing in any feeder secondary. The resultant current is digitally compared. Each phase has its independent setting. Timer starts on trip condition and is common for all three phases a changeover occurs. Time must be set a according. Two sets of changeover contacts are available common for all.

Product Details:

AE-1100 Phase Sequence Corrector Relay Used for protection of motors, pumps, transformers, etc from damage due to missing phases or negative phase sequences. A wrong sequences is corrected and two output contacts are provided which can be used to switch on the power contactors . Only the correct sequence contactor signal will be on at a time. However contactors must be interlocked during power wiring. The relay resets automatically and remains off when voltage is low, zero unbalanced or negative phase sequence. Manual reset can be provided.

Product Details:

Aditya Current Single element AE-510 Over Current Relay are ideal for sensing current faults in any one phase or earth for protection of AC machines, Transformers, Generators etc. The resultant current measured is digitally compared to a settable reference. This can be used to trip the breaker. Time must be set according to system requirement.

 

Product Details:

With the constant endorsement of our diligent experts, we are engrossed in presenting a highly qualitative AE-1120 Toggler Relay to the industry.

Product Details:

Relay is a three attempt cranking relay for engine starting with auto cut after 3 attempts. Two changeover contacts are given - for cranking the engine and for lockout in case the engine fails to start in three attempts. The relay locks out after 3 attempts.

Product Details:

We offer the top range of SPP Cum Toggler Relay for our valued patrons.

Product Details:

We offer the top range of AE-100 Time Delay Relay for our valued patrons.

Product Details:

AE 400 Single Phase Preventor Relay is used for protection and burnouts of pumps and motors against phase unbalance, missing and negative phase sequence. All the phases are continuously checked.

Product Details:

Backed by a team of knowledgeable professionals, we are an identified firm in the market for providing an extensive range of AE-400T Single Phase Preventer Relay.

Product Details:

Can be used for tripping in case frequency goes above limit. A lower or higher than limit condition if persisting for more than 1 or 2 sec a contact changeover occurs and an led on facia glows to indicate a trip condi on. This can be used to trip the breaker\supply. Two sets of changeover contacts are available. The relay is auto reset type.

Product Details:

We offer the top range of AE-210 Under Votage Relay for our valued patrons.

Product Details:

We offer the top range of Protectve Relay for our valued patrons.